Pellet Stove Furnace

Pellet stoves can be purchased as freestanding units or fireplace inserts that can give your home the look of a traditional fireplace with wood burning. These stoves are available in freestanding models as well as fireplace inserts. They can provide the appearance of an old-fashioned wood-burning fire.

The auger transports pellets from the hopper into the combustion chamber in the combustion chamber, where they are burned and generate heat. Sensors are able to monitor the flame and adjust the rate of operation in order to maintain the desired temperature in the room.

1. Energy Efficiency

Pellet stoves are a non-toxic, renewable fuel made from compressed sawdust as well as other materials. They are usually disposed of in landfills, but can also be used to provide a clean, efficient source of heat. They can help homeowners cut down on their energy consumption, and therefore greenhouse gas emissions. Many homeowners who own pellet stoves have reported that they've recouped their initial investment within just a few years, thanks to lower heating costs.

Pellets are more dense and compressed than natural wood, making them more efficient in burning. They also produce less creosote than traditional wood-burning fireplaces. They are also packed in plastic bags to keep out moisture and require less frequent cleaning.

Pellet stoves, like other heating systems, need to be sized and vented properly. A professional technician can evaluate your venting requirements and space to ensure the best results.

In the process of installation, a hearth is built in accordance with your specifications. Then, the vent is installed through a hole pre-cut in the siding of your home. The vent may be installed through a sidewall or a roof depending on your preference and local laws.

After the hearth and vent are finished and the stove is ready to be plugged in. Some manufacturers offer a remote control that makes starting and maintaining the fire simple, while others have additional sensors that monitor airflow, combustion flue temperature, pressure. If the system determines that it needs more or less pellets, it signals the auger to accelerate or slow down according to the situation.

Every stove has an hopper for storage that can hold from 35 to 130 pounds of pellets until they're needed. The size of the hopper will determine how often you'll need to replenish your stove. Larger hoppers permit longer periods before refills is required. A grille pulls air from the room, passes it through the heat exchanger, and then blows heated air in the living space through convection. A grate or auger distributes the pellets, and the pan beneath will collect any unburnt ones as well as the ashes of combustion.

While pellet stoves are more efficient than wood-burning stoves, they're not as efficient as natural gas furnaces or electricity-powered heaters. The electric components that drive their motorized parts require electricity and could pose an issue during a power outage, even though backup systems are in place like batteries and generators.

2. Low Maintenance

Pellet stoves are incredibly efficient, however, like any other major heating appliance, they require some care to ensure they are operating properly. Cleaning your stove and its exhaust vent on a regular basis will prevent the buildup of dangerous creosote that could cause a fire or explosion that can damage your stove and/or house.

A pellet stove is made up of natural particles that are compressed (such as kernels, nutshells of corn or small pieces of scrapwood) made from wood or other materials. The pellets are introduced into the combustion chamber through an auger powered with electricity. The thermostat you set controls the rate of pellets being fed to the burner. The fire can be kept roaring, or it can be reduced or even snuffed out depending on the temperature you set. When the fire goes out the ash is then thrown into an empty ash tin beneath the burner, which can be easily removed and disposed.

Pellets are created from the waste products from lumber processing that would otherwise be thrown away. They are renewable resources and release far less particulates into the air than traditional wood-burning stoves, which results in a clean burning heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals emitted from pellet stoves is much lower than the newer EPA certified wood stoves.

Due to the low emissions, these appliances do not need to be vented through chimneys as traditional wood stoves, but should be properly vented through a wall or other exterior structure. Pellet stoves come with flue ports that open from the rear or the top of the appliance and are connected to a vent pipe that extends outside the home.

One disadvantage of a pellet stove is that you need to purchase or store enough pellets to last the winter season. On average, pellet stove owners consume three tons of pellets over the course of winter at $200 per ton. The cost can be high but they're cheaper than purchasing firewood and transporting it to a wood-burning stove or fireplace. It is recommended to purchase enough pellets to ensure that your stove will run throughout the winter's coldest months. Additionally, you will must have a space to keep the pellets (preferably dry and cool).

3. Reduce carbon footprint

Pellet stoves generate heat from renewable biomass fuel, reducing reliance on finite fossils fuels. This reduces the carbon footprint as well as helping diversify energy sources in homes.

Even the most modern woodstoves that are EPA certified emit considerably less carbon dioxide than pellet stoves. The emissions from pellet stoves are significantly lower than the ones from gas furnaces. Pellets are made from sawdust and bark as well as other lumber fragments. They may also contain soybeans, corn, or agricultural waste. When burned, they emit fewer particulates (leading to respiratory issues and allergies), carcinogens and carbon monoxide as well as the nitrous oxides.

The main difference between wood stoves and pellet stove is the feed system. Pellet stoves are equipped with hoppers to hold the pellets. When the thermostat or sensors indicate that the room requires heating, the furnace turns and the pellets are fed into the combustion chamber where they are burned and generate heat. The air from combustion chamber is passed through a heat-exchanger, which transfers heat to the blower. This results in extremely low emissions and no creosote accumulation.

When the hopper is empty, a cyclone process removes the ash and places it in an ash pot. The stove is fitted with a fan that circulates clean, heated air throughout the room. The majority of pellet stoves require little maintenance and come with a huge viewing area for you and your family to enjoy the flames.

The most significant factor affecting emissions from pellet stoves is the quality of the pellets. The poor quality pellets emit more emissions. When choosing your pellets, ensure they're certified to meet certain standards and don't contain other ingredients, such as petroleum-based or urea-based substances. Look for a company that has a guarantee and will repair or replace parts in the event of a problem. If you're looking to take an environmentally friendly approach, some states allow homeowners to claim a tax deduction for installing pellet stoves. This is a great option to help offset the initial cost of this type stove and make installation more affordable.

4. Reduced Noise

Pellet stoves produce a minimal amount of emissions or smoke compared to fireplaces that burn wood. A fan is employed to spread heat more evenly throughout the room. This is among the reasons pellet stoves require less maintenance than traditional wood stoves. While wood stoves require frequent cleaning of chemicals and particulates to avoid deterioration, pellet stoves can be cleaned with a metal vacuum cleaner.

Many manufacturers have designed their stoves to ensure that they are easy to set up and operate, as well as maintain. The stoves are available in a variety of styles that match the design of your home. Some models come with a programmable thermostat remote control, as well as WIFI app so you can monitor and manage your stove from any location in the world.

Most pellet stoves come with an enormous fuel hopper, which can hold 35 to 130 pounds of pellets. The pellets are then fed into the combustion chamber by an auger. The amount of heat produced and the degree to which the fire will get is determined by the speed at which the pellets are fed to the burner. The hopper may be filled with hardwood pellets, composed of dense wood species such as oak and hickory, or softwood pellets. Many stoves are able to use biomass pellets made of switchgrass and corn. This is a green option.

Pellet stoves produce less smoke and require less maintenance since they use less polluting fuel than wood-burning fireplaces. They also do not require chimneys, making them a much more suitable option for new construction or get more info retrofits.

In contrast to wood stoves, which need to be kept regularly cleaned of creosote and other chemicals, pellet stoves need to be periodically inspected to ensure proper operation and maintenance. Based on the model, this could include a regular inspection and cleaning of the accumulation of Ash or "clinker," as well as the motor and fans. Your appliance dealer will be able to provide the proper procedures for your specific brand and model. He can also provide you with information regarding safety and storage, and assist you in locating the appropriate fuel for your stove.